Scratch and Dents

Discounted items that are blemished or returned with very limited damage and be used again just with some slight imperfection.

Discount Scratch And Dent

Chevy TBI To Holley Edelbrock 4 Barrel Intake Manifold Adapter Scratched 1.7 open #4

1" Thick and CNC Machined From 6061 Aluminum Engineered To Install A 1.7" and 2" TBI Throttle Body To A 4 Barrel Intake Manifold Smooth Transitio...

$49.99

$89.99

Dodge Charger and Challenger Active Exhaust Delete / Simulator 2015-2021 Scratch and Dent #5

THIS PART WAS INSTALLED AND REMOVED  NOT RETURNABLE CNC Machined From 6061 Aluminum Hard Anodized Black to Prevent Corrosion Includes All Har...

$64.99

$124.99

Khaos Motorsports Helix Throttle Body Spacer Dodge Charger / Challenger HEMI 84mm Anodized Black Scratch #2

THIS PART WAS INSTALLED AND REMOVED  NOT RETURNABLE 84mm Helix Bore Fits Ported or Aftermarket Throttle Bodies Only All Hardware Included Impr...

$39.99

$119.99

Khaos Motorsports Helix Throttle Body Spacer Dodge Charger / Challenger HEMI 84mm Anodized Black Scratch #3

THIS PART WAS INSTALLED AND REMOVED  NOT RETURNABLE 84mm Helix Bore Fits Ported or Aftermarket Throttle Bodies Only All Hardware Included Impr...

$39.99

$119.99

Khaos Motorsports Helix Throttle Body Spacer Dodge Charger / Challenger HEMI 90mm Anodized Black Scratch #2

THIS PART WAS INSTALLED AND REMOVED  NOT RETURNABLE 90mm Helix Bore Fits Ported or Aftermarket Throttle Bodies Only All Hardware Included Impr...

$39.99

$119.99

Jeep JK muffler delete 07-17 (END CUT WRONG)

THIS PART WAS CUT WRONG ON EXPANDED END NOT RETURNABLE Mandrel Bent Uses Factory Hanger Locations Easy Install of 20 Minutes Improves Departure A...

$59.99

$99.99

Turbo Muffler 2.25" ID Tri chamber design Universal Rumble

The offset of this muffler is a match to most dodge mufflers that came with the 2 1/4" exhaust system.  will fit most chargers and challen...

$25.00

$35.00

Turbo Muffler 2" ID Tri chamber design Universal Rumble

The offset of this muffler is a match to most dodge mufflers that came with the 2 1/4" exhaust system.  will fit most chargers and challen...

$25.00

$35.00

Dark Orange Intake Ring 15-21 Challenger

 SLIGHT DAMAGE. DISCOUNTED ITEM NOT RETURNABLE INTAKE RING BURNT ORANGE If you're ready to spice up the look of your vehicle, Khaos Motor...

$49.99

$139.99

PQD SD Khaos Motorsports Front Strut Bar Tower Brace (fits) Dodge Challenger Charger Magnum 300 (Non Shaker) SCRATCH DENT

Mandrel Bent Tig Welded Powder Coated Black, Hemi Orange in Stock Color Matched Options Will Take Additional 2 Weeks 45 Minute Install All Har...

$129.99

$329.99

Dodge Challenger / Charger Center Hub Cap Color Matched PRY SCRATCH DENT

 SLIGHT DAMAGE. DISCOUNTED ITEM NOT RETURNABLE SMALL CHIP IN CORNER  

$39.99

$119.99

Charger/challenger mid-muffler replacement Turbo Muffler 2.25" ID Tri chamber design Universal Rumble

this is a listing for two mufflers and two adaptors to fit in stock location of mid-muffler for all cars with the 2.25 exhaust.  Highly r...

$70.00

$149.99

Khaos is made for your vehicle.

Find all the best fitting parts for your whatever vehicle you drive. Shop all Makes

FAQ

  • Are all of your products made in the USA?

    A vast majority of our products are made right here in the USA!

  • Do you have any instructions for your delete kits?

    Yes we do, all you have to do to find them is scan the QR code on the card you received in you package and it will bring you to a list of instructions for all applications. From there just find the set of instructions that you need and start your install!

  • Do you sell any of your scrap?

    Yes we do! If your local to us and want to save some money on our mandrel bends, just come on over between 8:00AM and 4:00PM EST, and you can look through our scrap bends. The stainless steel scrap bends are $15.00 a peice, and our aluminized steel scrap bends are $10.00 a peice.

  • Can I bring my vehicle to you and have my parts installed?

    Of course you can, just email us at sales@khaosmotorsports.com and we can schedule your appointment!

  • Can I come in to buy my parts to save on shipping?

    Of course! If your local to us you may come in any time between 8AM and 4PM EST.

  • What is your return policy?

    Our return policy is listed at the bottom right side of our webpage, or click on this link: https://khaosmotorsports.com/policies/refund-policy

Made in Michigan, USA

When you purchase something from Khaos Motorsports, you are buying direct from the manufacturer.
Originally starting out as Machine Tech in the early 2000's, Khaos Motorsports is a fully operational machine shop in Wyoming, Michigan. For the past 15 years we have been a leading manufacturer in the aftermarket auto industry doing anything from heads, full engine builds, down pipes, cold air intakes, supercharger pulleys, the list goes on. Meet the team