• ACCOUNT
  • My Account
  • Contact Us

These are some of our newest products

Shop all Newest Products

Our newest products

6" Aluminized Pie Cuts 16 Gauge 4 Pack 6" Aluminized Pie Cuts 16 Gauge 4 Pack

6" Aluminized Pie Cuts 16 Gauge 4 Pack

4 pieces make a 90 Degree Bend 8 Pieces Make a 180 Degree Bend Cut on band saw and deburred, may need light sanding for tight fit. Made in USA

$26.99

2008-2014 6.2L TAHOE/YUKON/ESCALADE/SIERRA MUFFLER REPLACEMENT Aluminized steel 2008-2014 6.2L TAHOE/YUKON/ESCALADE/SIERRA MUFFLER REPLACEMENT Aluminized steel

2008-2014 6.2L TAHOE/YUKON/ESCALADE/SIERRA MUFFLER REPLACEMENT Aluminized steel

Manufactured In Grand Rapids Michigan USA Mandrel Bent 3.5" OD Aluminized steel 33.5" Long 3.5" I.D Inlet and Outlet Replaces Factory Muffler on S...

$109.99

$169.99

Take a look at some of our newest products!
Imperfection Bends Aluminized Imperfection Bends Aluminized

Imperfection Bends Aluminized

Imperfection Bends Aluminized    

$10.00

Imperfection Bends Stainless Steel Imperfection Bends Stainless Steel

Imperfection Bends Stainless Steel

Imperfection Bends Stainless Steel    

$15.00

3” ID to 3 1/4” or 3.25” ID Exhaust Reducer Pipe Adaptor Coupler aluminized 3” ID to 3 1/4” or 3.25” ID Exhaust Reducer Pipe Adaptor Coupler aluminized

3” ID to 3 1/4” or 3.25” ID Exhaust Reducer Pipe Adaptor Coupler aluminized

3" ID On One End 3.25" ID On One End 4" Length Aluminized steel Khaos Motorsports exhaust pipe adaptors are designed to connect two exhaust pipes...

$16.99

$24.99

#2 Chevy TBI Onto Holley Edelbrock 4 Barrel Intake Manifold 2.0 Adapter 4 Bolt Scratch And Dent #2 Chevy TBI Onto Holley Edelbrock 4 Barrel Intake Manifold 2.0 Adapter 4 Bolt Scratch And Dent

#2 Chevy TBI Onto Holley Edelbrock 4 Barrel Intake Manifold 2.0 Adapter 4 Bolt Scratch And Dent

Has Nicks And Dings Fully Functional Non Returnable 1" Thick and CNC Machined From 6061 Aluminum Engineered To Install A 1.7" For Small Block an...

$59.99

$99.99

Khaos Motorsports Light Block Off Pads Fit Charger Pursuit/Enforcer White Khaos Motorsports Light Block Off Pads Fit Charger Pursuit/Enforcer White

Khaos Motorsports Light Block Off Pads Fit Charger Pursuit/Enforcer White

This Pads will cover the holes left on your charger pursuit from the spot lights, comes with a left and right side and hardware included. Made fro...

$24.99

C8 Header Collector Flange Stainless Steel For Chevy Corvette 2020+ C8 Header Collector Flange Stainless Steel For Chevy Corvette 2020+

C8 Header Collector Flange Stainless Steel For Chevy Corvette 2020+

Start that new exhaust with our collector flange designed to fit the C8 exhaust.  CNC Lasered out of Stainless steel right here in the U.S.A.  Mach...

$199.99

$299.99

5.7 Hemi Header Collector Flange Stainless Steel For Dodge Challenger / Charger 5.7 Hemi Header Collector Flange Stainless Steel For Dodge Challenger / Charger

5.7 Hemi Header Collector Flange Stainless Steel For Dodge Challenger / Charger

Start that new exhaust with our header collector flange designed to fit Hemi generation 4 motor.  CNC machined out of Stainless steel right here in...

$89.99

$99.99

2007-2021 Chevy / GMC Muffler Replacement Fits 2500 6.0L/6.6L Gas 304 Stainless 2007-2021 Chevy / GMC Muffler Replacement Fits 2500 6.0L/6.6L Gas 304 Stainless

2007-2021 Chevy / GMC Muffler Replacement Fits 2500 6.0L/6.6L Gas 304 Stainless

Manufactured In Grand Rapids Michigan USA Mandrel Bent 3.5" OD 304 Stainless Steel 3.5" I.D Inlet and Outlet 33.5" Long 2 Stainless Steel band cla...

$179.99

$249.99

SRT JEEP GRAND CHEROKEE AND DODGE DURANGO 2015+ MID MUFFLER REPLACEMENT 304 Stainless SRT JEEP GRAND CHEROKEE AND DODGE DURANGO 2015+ MID MUFFLER REPLACEMENT 304 Stainless

SRT JEEP GRAND CHEROKEE AND DODGE DURANGO 2015+ MID MUFFLER REPLACEMENT 304 Stainless

MUFFLER REPLACEMENT FOR YOUR 2015 AND UP SRT JEEP GRAND CHEROKEE AND SRT DODGE DURANGO MADE FROM 2.75" 304 STAINLESS PIPE THAT THE ENDS ARE EXPANDE...

$189.99

$229.99

1.5" OD 90 Degree Mandrel Bend 304 Stainless Steel 1.5" OD 90 Degree Mandrel Bend 304 Stainless Steel

1.5" OD 90 Degree Mandrel Bend 304 Stainless Steel

  1.5" 1-1/2" OD 16 Gauge 304 Stainless Steel 90 Degree Mandrel Bend Manufactured In Grand Rapids MI USA  Improve your vehicles air flow with man...

$20.99

$24.99

Khaos is made for your vehicle.

Find all the best fitting parts for your whatever vehicle you drive. Shop all Makes

Resources + Installation Guides

Read more guides >

FAQ

  • Are all of your products made in the USA?

    A vast majority of our products are made right here in the USA!

  • Do you have any instructions for your delete kits?

    Yes we do, all you have to do to find them is scan the QR code on the card you received in you package and it will bring you to a list of instructions for all applications. From there just find the set of instructions that you need and start your install!

  • Do you sell any of your scrap?

    Yes we do! If your local to us and want to save some money on our mandrel bends, just come on over between 8:00AM and 4:00PM EST, and you can look through our scrap bends. The stainless steel scrap bends are $15.00 a peice, and our aluminized steel scrap bends are $10.00 a peice.

  • Can I bring my vehicle to you and have my parts installed?

    Of course you can, just email us at sales@khaosmotorsports.com and we can schedule your appointment!

  • Can I come in to buy my parts to save on shipping?

    Of course! If your local to us you may come in any time between 8AM and 4PM EST.

  • What is your return policy?

    Our return policy is listed at the bottom right side of our webpage, or click on this link: https://khaosmotorsports.com/policies/refund-policy

See more FAQ

Made in Michigan, USA

When you purchase something from Khaos Motorsports, you are buying direct from the manufacturer.
Originally starting out as Machine Tech in the early 2000's, Khaos Motorsports is a fully operational machine shop in Wyoming, Michigan. For the past 15 years we have been a leading manufacturer in the aftermarket auto industry doing anything from heads, full engine builds, down pipes, cold air intakes, supercharger pulleys, the list goes on. Meet the team