Our exhaust kits are designed to fit perfectly for each application

Shop all Exhaust Kits

Find The Perfect Part

Mid Muffler Replacement Fits Dodge Challenger/ Charger/300 SRT Scatpack Hellcat 6.4 6.1 6.2 392 2008-2021 and 2017-2021 5.7 (OVAL MUFFLER ONLY)

NO WELDING REQUIRED!! Mandrel Bent Tubing Minimum Drone Inside, Great Sound Outside! Comes With All Hardware Needed Fits Dodge Vehicles equipped w...

$109.99

$139.99

Dodge Charger and Challenger Active Exhaust Simulator 2015-2023

CNC Machined From 6061 Aluminum Hard Anodized Black to Prevent Corrosion Includes All Hardware Needed 15-20 Minute Install Fits Aftermarket and OE...

$109.99

$139.99

Take a look at some of our most popular exhaust kits!

Mid Muffler Replacement For Dodge Charger / Challenger / 300 2005-2016 5.7 Automatic

NO WELDING REQUIRED!! Mandrel Bent Tubing Minimum Drone Inside, Great Sound Outside! Comes With All Hardware Needed Fits Dodge Vehicles equipped w...

$109.99

$129.99

304 Stainless Steel Mid Muffler Delete Kit Dodge Challenger / Charger / 300/SRT/Hellcat 6.4 6.1 6.2 392 2008-2021 and 2017-2021 5.7 (For Oval Stock Muffler)

NO WELDING REQUIRED!! Mandrel Bent Tubing Minimum Drone Inside, Great Sound Outside! 4 Accuseal by Torca Stainless Steel Band Clamps Slotted Relei...

$139.99

$149.99

Jeep Wrangler JK JKU Axle Back / Rear Muffler Delete Rear Exit 2007-2017

Mandrel Bent Uses Factory Hanger Locations Easy Install of 20 Minutes Improves Departure Angle All Hardware Included No Cutting! Khaos Motorsport...

$74.99

$99.99

2011+ Dodge Durango or Grand Cherokee 5.7 Muffler Replacement For AWD

Want To Get Rid Of That Over Sized Muffler On Your Durango Or Grand Cherokee? We Got Our New Muffler Delete That Will Give You A Better Sound And I...

$94.99

$124.99

Resonator Delete Kit / Tail Pipes Dodge Charger Chrysler 300 5.7L 2011-2014/ Pursuit 2012-18

You can feel that Hemi power, but you can't hear it! Tired of the Mustang pulling up next to you and reving it up, while you've got nothing? Have n...

$134.99

$179.99

Mid Muffler Replacement Kit Fits Dodge Challenger / Charger SRT Hellcat (Round Muffler Only)

NO WELDING REQUIRED! Two(2) 2.75" 14 gauge Aluminized Steel Tubes Flared to 2.75" ID On Each End  Four(4) 2.75" U-Bolt Clamps Fits Dodge SRT Vehic...

$90.99

$119.99

Dodge Charger and Challenger 3" 304 Stainless Steel Mandrel Bent Crossover X-Pipe

Made From 3" 304 Stainless Steel Fits Perfectly Inside Exhaust Tunnel of Challengers and Chargers Improved Scavenging Over Stock Exhaust CNC Cut ...

$209.99

$249.99

2007-2021 Chevy / GMC Muffler Replacement Fits 2500 6.0L/6.6L Gas

Manufactured In Grand Rapids Michigan USA Mandrel Bent 3.5" OD 16ga Aluminized Mild Steel 3.5" I.D Inlet and Outlet Replaces Factory Muffler on St...

$109.99

$139.99

2019 - Present Dodge Ram 5.7L Muffler Delete Aluminized Steel

Fits 2019+ Stock Ram 5.7L Exhaust Quick and Easy Install Made From Aluminized Steel Mandrel Bent 3" O.D Tubing All Hardware Included Made in Grand...

$119.99

$154.99

3" Crossover X-Pipe Tig Welded 304 Stainless Steel

CNC Precision Cut Crossover Made From 304 Stainless Steel Tig Welded When fabricating or repairing your exhaust system Khaos Motorsports is dedic...

$199.99

$239.99

Khaos is made for your vehicle.

Find all the best fitting parts for your whatever vehicle you drive. Shop all Makes

FAQ

  • Are all of your products made in the USA?

    A vast majority of our products are made right here in the USA!

  • Do you have any instructions for your delete kits?

    Yes we do, all you have to do to find them is scan the QR code on the card you received in you package and it will bring you to a list of instructions for all applications. From there just find the set of instructions that you need and start your install!

  • Do you sell any of your scrap?

    Yes we do! If your local to us and want to save some money on our mandrel bends, just come on over between 8:00AM and 4:00PM EST, and you can look through our scrap bends. The stainless steel scrap bends are $15.00 a peice, and our aluminized steel scrap bends are $10.00 a peice.

  • Can I bring my vehicle to you and have my parts installed?

    Of course you can, just email us at sales@khaosmotorsports.com and we can schedule your appointment!

  • Can I come in to buy my parts to save on shipping?

    Of course! If your local to us you may come in any time between 8AM and 4PM EST.

  • What is your return policy?

    Our return policy is listed at the bottom right side of our webpage, or click on this link: https://khaosmotorsports.com/policies/refund-policy

Made in Michigan, USA

When you purchase something from Khaos Motorsports, you are buying direct from the manufacturer.
Originally starting out as Machine Tech in the early 2000's, Khaos Motorsports is a fully operational machine shop in Wyoming, Michigan. For the past 15 years we have been a leading manufacturer in the aftermarket auto industry doing anything from heads, full engine builds, down pipes, cold air intakes, supercharger pulleys, the list goes on. Meet the team